LAMP 284B
This “full color” light engine its designed to be used on ceiling or wall recessed space; and it is perfect for diffuse atmosphere and retro lighting.
LAMP .284BW3 match some standard linear light fitting, or may be designed an embedded body for different applications. We suggest the power control of every single light engine or group of maximum 10 in serial, with appropriate wiring.
LAMP 284B
THERMAL DEVICE
the PCB Has A 3M Tape With High Thermal Sink
coificent , The Maximum Working Temperature Is
70 Degree C , Measured On Led Pin With All Color
on At Maximu Power .
FULL COLOR TECHNOLOGY
the LED Used In This Application Has The “full Color”
technology And The Principal Difference With The
traditional RGB Is On The Narrow Position Of The 3
coloured Diods - Red, Green And Blue - That Goal
an Immediately Colour Mixing.
OPTICS/LENS
LAMP .284BW3 Is Designed To Be Use Both Without
and With Optics; The Collimator Are Available With
narrow, Medium And Wide Beam.
POWER
- Those Light Engines Receive Power And Input
from A DMX Controller. We Suggest Our Controller
boards DMX DDS289, DDS282a And DDS334.
- Power Supply Voltage Range : 15-30VDC
- Max Power Supply Current 400mA At 24vdc
- St.by Current 10ma At 24vdc
-Meidum Current Per Color 80-140mA At 24vdc
KIND OF WIRING
- For Multiple Wiring - With N-light Engines - They Have
to Be Connected Only In Serial Way With Appropriate
cables And Connectors Max 6 Units Per Chain.
DOWNLOAD PDF