OverFlexPix

OverFlexPix is a resin tube, with individual pixel control, each pixel consists of 7 RGB leds with 18mm pitches, for a total length of 126mm.
The light is diffused by opal polyurethane resin and is equipped with aluminum fasteners. There are two versions of OverFlexPix, a SIDE light-emitting version and a TOP light-emitting version, these are connectable with the female male connector where power and SPI control signal is relaunched, and amplified again Internally, the maximum number of pixels is1024, and it is necessary to relaunch the power every 10 meters of product in the 4W version, while at 8W every 5 meters.
 The led control system built into OverFlexPix features curved grey scales, PWM scrambles, and 10bits of adjustment generated by the control unit even if it receives 8bits from ART NET.
 The Art NET SPI control system can be the Trex Pro equipped with 8 SPI outputs, or from the Trex bis that is equipped with 2 SPI channels, these interface via ART NET to the management shells.
Pixel addressing is automatic, each module self-directs when turned on.
There are 5 different lengths 1mt,2mt,3mt,4mt and 5mt.
Several measures are possible on request.

OverFlexPix



DOWNLOAD PDF