ECCO ReadySteadyGo device can be defined and classified as the” lingua franca “ (universal-translator) for all users of USB/DMX/RDM protocols. ReadySteadyGo is totally compatible with standard E1.20 RDM & DMX USITT 1990. ReadySteadyGo is opto isolated and can be powered directly from any PC USB port (Mac too). This device is totally free-electric interferences between DMX & PC. Should the device, inadvertently, be disconnected and immediately reconnected, the software will instantly reinstate connections. The hardware of the ColoursReadySteadyGo is robust and ergonomically designed to be handled without any fear of breaking if incidentally dropped. ColoursReadySteadyGo has been designed to facilitate RDM bi-directional communications using the 2-core DMX protocol. ColoursReadySteadyGo integrates the discovery RDM protocol that identifies all fixtures connected with DMX protocol.
The ColoursReadySteadyGo is also the perfect interface DMX pass-thorugh gear compatible with the majority of all existing world’s software


Power Supply From PC 200mA DMX USITT Compliance
RDM E1.20 Compliance DMX Optoinsulation :
2500VRMS Bus Isolation Using On-Chip High-Voltage Capacitors
+4.5V To +5.5V Power-Supply Voltage Range ±15kV ESD Protection
Hot-Swap-Protected Driver-Enable Input Undervoltage Lockout
Isolation-Barrier Fault Detection Short-Circuit Protected
Thermal Shutdown
Open-Line And Shorted-Line Fail-Safe Receiver


Software ECCO Windows

Overled Esuite software WIN

Overled Esuite software MAC