Overlinear is an RGB pixel controlled LED bar, each pixel consists of 7 RGB LEDs with 18mm pitch, for a total length of 126mm. The light is diffused through the extruded opaline and is equipped with a plastic formwork for assembly. The bar has connector input and output for the relaunch of the power and Signal Control SPI (Serial Peripheral interface) This signal allows to send up to 2000 channels converted from ART NET at 60 Fps, the LED control system has the grey scales, PWM scrambe, and 10bits of control generated by the control unit, which can be the Trex Pro equipped with 8 SPI outputs, or from the Trex bis which is equipped with 2 SPI output. Each Overlinear bar reamplify the signal and relaunches it to the next bar, it is necessary to electrically return the power to 24vdc to avoid voltage drops in the various connections in the 4W version every 10 bars, in the 8W version it takes every 5 Bars. The patching of the bars is automatic. There are 3 different lengths available 1mt,2mt,3mt.
Overlinear step filesDOWNLOAD